Apoxie Sculpt – How to Use

Mixing and working time for Apoxie Sculpt

*Wear appropriate gloves.

1. Measure equal parts of A&B. Both have a clay-like consistency.
2. Mix&knead together for 2 minutes, until thoroughly combined and a uniform color is achieved. *Note that incomplete mixing will  give poor results.
3. Apoxie^_® Sculpt is now ready to use and has a working time of 2-3 hours. Apoxie^_® Sculpt can be smoothed or textured with a finger or tool, and water or Aves^_® Safety Solvent, before set-up. Apoxie^_® Sculpt can be painted wet or dry. Full cure time is 24 hours.
4. Clean up with soap and water or Aves_^® Safety Solvent.

• *24 hour cure time is required for product to be waterproof and for hard finishing purposes such as sanding, tapping, drilling, grinding, tooling, carving, lathing, etc.
• *Out Door Quality! *Shelf life can be maintained or extended by refrigerating or freezing. It is freeze-thaw stable.
• *Keep containers sealed when not in use.
• *Keep out of reach of children…[S 2] Safe for adults when used as directed.
• *Wear appropriate disposable gloves [e.g., vinyl or nitrile] when blending parts A and B…[S 37]
• *Wear dust mask & safety glasses when sanding/grinding…[S 36]

Working Time Line Guide:

1/2 hour:  Sticky & most adhesive

1 to 2 hours:  Easy to work with

2 to 3 hours:  Setting up, form-able detail

24 hours:  Hard, cured & waterproof